Search by Part Number
Filter by Application
» Jeep / AMC       Clear
» 4.0L
» 4.2L




SIR-6123JP-1 #1
SIR-6123JP-1 #1
SIR-6123JP-1 #2
SIR-6123JP-1 #3
SIR-6123JP-1 #4
SIR-6123JP-1 #5

Single 6.123" 5140 Steel I-Beam, 3/8" Arp 8740 Bolts, For press-fit Pins

"SIR" FORGED 5140 STEEL I-BEAM RODS  |  Part# SIR-6123JP-1


12 in stock

Southaven, MS

Required For Press-Fit Pistons

Important Torque to 40 ft-lbs - ARP moly lube only!


Highlights:

  • Bolts: 3/8" ARP 8740
  • Material: Forged 5140 Steel
  • Center to Center Length: 6.123"
  • Pin Size: 0.931
  • Pin End Width: 1.06
  • Rod Journal: 2.095
  • Housing Bore: 2.208
  • Big End Width: 1.06
  • For press-fit piston pins
  • Typical Weight: 605g

Forged 5140 steel I-Beam connecting rods are an upgrade from O.E. rods and feature a shot-peened surface. Sizing is held to exact tolerances. Sold as a weight-matched set. Recommended for naturally-aspirated, pump gas, road car use.

$71.99




Forged 5140 steel I-Beam connecting rods are an upgrade from O.E. rods and feature a shot-peened surface. Sizing held to exact tolerances. Specify weight required when ordering. Recommended for naturally-aspirated, pump gas, road car use.